{0} ok boot cdrom
Boot device: /pci@0/pci@0/pci@1/pci@0/pci@1/pci@0/usb@0,2/hub@4/device@4/storage@0/disk@0:f File and args: -v
OpenBSD IEEE 1275 Bootblock 1.4
..>> OpenBSD BOOT 1.11
Trying bsd...
open /pci@0/pci@0/pci@1/pci@0/pci@1/pci@0/usb@0,2/hub@4/device@4/storage@0/disk@0,0:f/etc/random.seed: No such file or directory
Booting /pci@0/pci@0/pci@1/pci@0/pci@1/pci@0/usb@0,2/hub@4/device@4/storage@0/disk@0,0:f/bsd
4106024@0x1000000+6360@0x13ea728+3250896@0x1c00000+943408@0x1f19ad0
symbols @ 0xfeb02340 139 start=0x1000000
console is /virtual-devices@100/console@1
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2018 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 6.4 (RAMDISK) #6: Fri Oct 12 10:32:59 MDT 2018
deraadt@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/RAMDISK
real mem = 34225520640 (32640MB)
avail mem = 33615257600 (32058MB)
unknown option `v'
mainbus0 at root: SPARC Enterprise T5120
cpu0 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
[...]
bootpath: /pci@0,0/pci@0,0/pci@1,0/pci@0,0/pci@1,0/pci@0,0/usb@0,2/hub@4,0/device@4,0/storage@0,0/disk@0,0:f
root on rd0a swap on rd0b dump on rd0b
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
Welcome to the OpenBSD/sparc64 6.4 installation program.
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell?
der Installationsprozess von OpenBSD ist, wie üblich, sehr straigtforward
ich installiere hier auf eine billige SATA-SSD
der Kopiervorgang von CD kann sehr lange dauern
At any prompt except password prompts you can escape to a shell by
typing '!'. Default answers are shown in []'s and are selected by
pressing RETURN. You can exit this program at any time by pressing
Control-C, but this can leave your system in an inconsistent state.
System hostname? (short form, e.g. 'foo') caper
Available network interfaces are: em0 em1 em2 em3 nep0 nep1 nep2 nep3 vlan0.
Which network interface do you wish to configure? (or 'done') [em0] em0
IPv4 address for em0? (or 'dhcp' or 'none') [dhcp] dhcp
em0: no lease..... got lease
em0: bound to 192.168.142.191 from 192.168.142.1 (60:e3:27:c8:4d:c7)
IPv6 address for em0? (or 'autoconf' or 'none') [none] autoconf
Available network interfaces are: em0 em1 em2 em3 nep0 nep1 nep2 nep3 vlan0.
Which network interface do you wish to configure? (or 'done') [done]
Using DNS domainname home.kuehrmann.net
Using DNS nameservers at 192.168.142.1
Password for root account? (will not echo)
Password for root account? (again)
Start sshd(8) by default? [yes]
Setup a user? (enter a lower-case loginname, or 'no') [no] alex
Full name for user alex? [alex] Alexander Kuehrmann
Password for user alex? (will not echo)
Password for user alex? (again)
WARNING: root is targeted by password guessing attacks, pubkeys are safer.
Allow root ssh login? (yes, no, prohibit-password) [no]
What timezone are you in? ('?' for list) [Europe/Berlin]
Available disks are: sd0.
Which disk is the root disk? ('?' for details) [sd0]
The auto-allocated layout for sd0 is:
# size offset fstype [fsize bsize cpg]
a: 1.0G 0 4.2BSD 2048 16384 1 # /
b: 10.3G 2097152 swap
c: 111.8G 0 unused
d: 4.0G 23621632 4.2BSD 2048 16384 1 # /tmp
e: 13.3G 32010240 4.2BSD 2048 16384 1 # /var
f: 2.0G 59942912 4.2BSD 2048 16384 1 # /usr
g: 1.0G 64137216 4.2BSD 2048 16384 1 # /usr/X11R6
h: 16.3G 66234368 4.2BSD 2048 16384 1 # /usr/local
i: 2.0G 100372480 4.2BSD 2048 16384 1 # /usr/src
j: 6.0G 104566784 4.2BSD 2048 16384 1 # /usr/obj
k: 55.9G 117149696 4.2BSD 2048 16384 1 # /home
Use (A)uto layout, (E)dit auto layout, or create (C)ustom layout? [a]
/dev/rsd0a: 1024.0MB in 2097152 sectors of 512 bytes
6 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
/dev/rsd0k: 57278.0MB in 117305344 sectors of 512 bytes
283 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
/dev/rsd0d: 4096.0MB in 8388608 sectors of 512 bytes
21 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
/dev/rsd0f: 2048.0MB in 4194304 sectors of 512 bytes
11 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
/dev/rsd0g: 1024.0MB in 2097152 sectors of 512 bytes
6 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
/dev/rsd0h: 16669.0MB in 34138112 sectors of 512 bytes
83 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
/dev/rsd0j: 6144.0MB in 12582912 sectors of 512 bytes
31 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
/dev/rsd0i: 2048.0MB in 4194304 sectors of 512 bytes
11 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
/dev/rsd0e: 13639.0MB in 27932672 sectors of 512 bytes
68 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
/dev/sd0a (b183195151e64be0.a) on /mnt type ffs (rw, asynchronous, local)
/dev/sd0k (b183195151e64be0.k) on /mnt/home type ffs (rw, asynchronous, local, nodev, nosuid)
/dev/sd0d (b183195151e64be0.d) on /mnt/tmp type ffs (rw, asynchronous, local, nodev, nosuid)
/dev/sd0f (b183195151e64be0.f) on /mnt/usr type ffs (rw, asynchronous, local, nodev)
/dev/sd0g (b183195151e64be0.g) on /mnt/usr/X11R6 type ffs (rw, asynchronous, local, nodev)
/dev/sd0h (b183195151e64be0.h) on /mnt/usr/local type ffs (rw, asynchronous, local, nodev)
/dev/sd0j (b183195151e64be0.j) on /mnt/usr/obj type ffs (rw, asynchronous, local, nodev, nosuid)
/dev/sd0i (b183195151e64be0.i) on /mnt/usr/src type ffs (rw, asynchronous, local, nodev, nosuid)
/dev/sd0e (b183195151e64be0.e) on /mnt/var type ffs (rw, asynchronous, local, nodev, nosuid)
Let's install the sets!
Location of sets? (cd0 disk http or 'done') [cd0]
Pathname to the sets? (or 'done') [6.4/sparc64]
Select sets by entering a set name, a file name pattern or 'all'. De-select
sets by prepending a '-', e.g.: '-game*'. Selected sets are labelled '[X]'.
[X] bsd [X] base64.tgz [X] game64.tgz [X] xfont64.tgz
[X] bsd.mp [X] comp64.tgz [X] xbase64.tgz [X] xserv64.tgz
[X] bsd.rd [X] man64.tgz [X] xshare64.tgz
Set name(s)? (or 'abort' or 'done') [done] -x*
[X] bsd [X] base64.tgz [X] game64.tgz [ ] xfont64.tgz
[X] bsd.mp [X] comp64.tgz [ ] xbase64.tgz [ ] xserv64.tgz
[X] bsd.rd [X] man64.tgz [ ] xshare64.tgz
Set name(s)? (or 'abort' or 'done') [done]
Directory does not contain SHA256.sig. Continue without verification? [no] yes
Installing bsd 100% |**************************| 10898 KB 02:28
Installing bsd.mp 100% |**************************| 10967 KB 02:32
Installing bsd.rd 100% |**************************| 2689 KB 00:37
Installing base64.tgz 100% |**************************| 138 MB 32:44
Extracting etc.tgz 100% |**************************| 259 KB 00:00
Installing comp64.tgz 100% |**************************| 62046 KB 14:22
Installing man64.tgz 100% |**************************| 7094 KB 01:38
Installing game64.tgz 100% |**************************| 2806 KB 00:39
Location of sets? (cd0 disk http or 'done') [done]
Time appears wrong. Set to 'Sat Dec 22 05:12:18 CET 2018'? [yes]
Saving configuration files... done.
Making all device nodes... done.
Multiprocessor machine; using bsd.mp instead of bsd.
Relinking to create unique kernel... done.
CONGRATULATIONS! Your OpenBSD install has been successfully completed!
When you login to your new system the first time, please read your mail
using the 'mail' command.
Exit to (S)hell, (H)alt or (R)eboot? [halt] r
syncing disks... done
rebooting
Trying bsd...
Booting /pci@0/pci@0/pci@2/scsi@0/disk@0,0:a/bsd
9458808@0x1000000+2952@0x1905478+206544@0x1c00000+3987760@0x1c326d0
symbols @ 0xfe99a400 165+610944+416267 start=0x1000000
[ using 1028408 bytes of bsd ELF symbol table ]
console is /virtual-devices@100/console@1
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2018 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 6.4 (GENERIC.MP) #6: Fri Oct 12 09:57:36 MDT 2018
deraadt@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/GENERIC.MP
real mem = 34225520640 (32640MB)
avail mem = 33604894720 (32048MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
unknown option `v'
mainbus0 at root: SPARC Enterprise T5120
cpu0 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu1 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu2 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu3 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu4 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu5 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu6 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu7 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu8 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu9 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu10 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu11 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu12 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu13 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu14 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu15 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu16 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu17 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu18 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu19 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu20 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu21 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu22 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu23 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu24 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu25 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu26 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu27 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu28 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu29 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu30 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu31 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu32 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu33 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu34 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu35 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu36 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu37 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu38 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu39 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu40 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu41 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu42 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu43 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu44 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu45 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu46 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu47 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu48 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu49 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu50 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu51 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu52 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu53 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu54 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu55 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu56 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu57 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu58 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu59 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu60 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu61 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu62 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu63 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
vbus0 at mainbus0
"flashprom" at vbus0 not configured
"tpm" at vbus0 not configured
cbus0 at vbus0
vldc0 at cbus0
vldcp0 at vldc0 chan 0x14: ivec 0x28, 0x29 channel "spds"
"sunvts" at vldc0 chan 0x6 not configured
"sunmc" at vldc0 chan 0x7 not configured
"explorer" at vldc0 chan 0x8 not configured
"led" at vldc0 chan 0x9 not configured
"flashupdate" at vldc0 chan 0xa not configured
"ipmi" at vldc0 chan 0xc not configured
"system-management" at vldc0 chan 0xd not configured
vldc1 at cbus0
"spfma" at vldc1 chan 0x5 not configured
vldc2 at cbus0
vldcp1 at vldc2 chan 0x0: ivec 0x0, 0x1 channel "hvctl"
"ldom-primary" at vldc2 chan 0x1 not configured
"fmactl" at vldc2 chan 0x3 not configured
vldc3 at cbus0
"ldmfma" at vldc3 chan 0x4 not configured
"virtual-domain-service" at cbus0 not configured
"n2cp" at vbus0 not configured
"ncp" at vbus0 not configured
vrng0 at vbus0
vcons0 at vbus0: ivec 0x111, console
vrtc0 at vbus0
vpci0 at mainbus0: bus 2 to 18, dvma map 80000000-ffffffff
pci0 at vpci0
ppb0 at pci0 dev 0 function 0 "PLX PEX 8533" rev 0xaa
pci1 at ppb0 bus 3
ppb1 at pci1 dev 1 function 0 "PLX PEX 8533" rev 0xaa
pci2 at ppb1 bus 4
ppb2 at pci2 dev 0 function 0 "PLX PEX 8517" rev 0xac
pci3 at ppb2 bus 5
ppb3 at pci3 dev 1 function 0 "PLX PEX 8517" rev 0xac
pci4 at ppb3 bus 6
ppb4 at pci4 dev 0 function 0 "PLX PEX 8112" rev 0xaa
pci5 at ppb4 bus 7
ohci0 at pci5 dev 0 function 0 "NEC USB" rev 0x43: ivec 0x16, version 1.0
ohci1 at pci5 dev 0 function 1 "NEC USB" rev 0x43: ivec 0x17, version 1.0
ehci0 at pci5 dev 0 function 2 "NEC USB" rev 0x04: ivec 0x14
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "NEC EHCI root hub" rev 2.00/1.00 addr 1
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "NEC OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "NEC OHCI root hub" rev 1.00/1.00 addr 1
ppb5 at pci3 dev 2 function 0 "PLX PEX 8517" rev 0xac
pci6 at ppb5 bus 8
em0 at pci6 dev 0 function 0 "Intel 82571EB" rev 0x06: ivec 0x17, address 00:21:28:5d:67:76
em1 at pci6 dev 0 function 1 "Intel 82571EB" rev 0x06: ivec 0x14, address 00:21:28:5d:67:77
ppb6 at pci3 dev 3 function 0 "PLX PEX 8517" rev 0xaa
pci7 at ppb6 bus 9
em2 at pci7 dev 0 function 0 "Intel 82571EB" rev 0x06: ivec 0x14, address 00:21:28:5d:67:78
em3 at pci7 dev 0 function 1 "Intel 82571EB" rev 0x06: ivec 0x15, address 00:21:28:5d:67:79
ppb7 at pci1 dev 2 function 0 "PLX PEX 8533" rev 0xaa
pci8 at ppb7 bus 10
mpi0 at pci8 dev 0 function 0 "Symbios Logic SAS1068E" rev 0x04: msi
mpi0: UNUSED, firmware 1.27.2.0
scsibus1 at mpi0: 112 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WDS120G2G0A-, 0000> SCSI3 0/direct fixed naa.5001b448b95de9e6
sd0: 114480MB, 512 bytes/sector, 234455040 sectors
ppb8 at pci1 dev 8 function 0 "PLX PEX 8533" rev 0xaa
pci9 at ppb8 bus 11
ppb9 at pci9 dev 0 function 0 "PLX PEX 8533" rev 0xaa
pci10 at ppb9 bus 12
ppb10 at pci10 dev 1 function 0 "PLX PEX 8533" rev 0xaa: msi
pci11 at ppb10 bus 13
ppb11 at pci10 dev 2 function 0 "PLX PEX 8533" rev 0xaa: msi
pci12 at ppb11 bus 14
ppb12 at pci10 dev 8 function 0 "PLX PEX 8533" rev 0xaa: msi
pci13 at ppb12 bus 15
ppb13 at pci10 dev 9 function 0 "PLX PEX 8533" rev 0xaa: msi
pci14 at ppb13 bus 16
ppb14 at pci10 dev 10 function 0 "PLX PEX 8533" rev 0xaa: msi
pci15 at ppb14 bus 17
ppb15 at pci1 dev 9 function 0 "PLX PEX 8533" rev 0xaa: msi
pci16 at ppb15 bus 18
nep0 at pci16 dev 0 function 0 "Sun Neptune" rev 0x01: msi, address 00:21:28:62:af:d6
brgphy0 at nep0 phy 13: BCM5464 10/100/1000baseT PHY, rev. 1
nep1 at pci16 dev 0 function 1 "Sun Neptune" rev 0x01: msi, address 00:21:28:62:af:d7
brgphy1 at nep1 phy 12: BCM5464 10/100/1000baseT PHY, rev. 1
nep2 at pci16 dev 0 function 2 "Sun Neptune" rev 0x01: msi, address 00:21:28:62:af:d8
brgphy2 at nep2 phy 11: BCM5464 10/100/1000baseT PHY, rev. 1
nep3 at pci16 dev 0 function 3 "Sun Neptune" rev 0x01: msi, address 00:21:28:62:af:d9
brgphy3 at nep3 phy 10: BCM5464 10/100/1000baseT PHY, rev. 1
"niu" at mainbus0 not configured
"pci-performance-counters" at mainbus0 not configured
ebus0 at mainbus0
com0 at ebus0 addr ca0000-ca0007 ivec 0x13: ns16550a, 16 byte fifo
uhub3 at uhub0 port 4 configuration 1 interface 0 "Cypress Semiconductor USB2 Hub" rev 2.00/0.0b addr 2
umass0 at uhub3 port 4 configuration 1 interface 0 "OEM Mass Storage plus" rev 2.00/0.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
cd0 at scsibus2 targ 1 lun 0: <TSSTcorp, CDDVDW TS-T633A, SR00> SCSI0 5/cdrom removable serial.09280000EF0123456789
uhidev0 at uhub3 port 4 configuration 1 interface 1 "OEM Mass Storage plus" rev 2.00/0.00 addr 3
uhidev0: iclass 3/0
uhid0 at uhidev0: input=1, output=1, feature=0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
bootpath: /pci@0,0/pci@0,0/pci@2,0/scsi@0,0/disk@0,0
root on sd0a (b183195151e64be0.a) swap on sd0b dump on sd0b
Automatic boot in progress: starting file system checks.
/dev/sd0a (b183195151e64be0.a): file system is clean; not checking
/dev/sd0k (b183195151e64be0.k): file system is clean; not checking
/dev/sd0d (b183195151e64be0.d): file system is clean; not checking
/dev/sd0f (b183195151e64be0.f): file system is clean; not checking
/dev/sd0g (b183195151e64be0.g): file system is clean; not checking
/dev/sd0h (b183195151e64be0.h): file system is clean; not checking
/dev/sd0j (b183195151e64be0.j): file system is clean; not checking
/dev/sd0i (b183195151e64be0.i): file system is clean; not checking
/dev/sd0e (b183195151e64be0.e): file system is clean; not checking
setting tty flags
pf enabled
starting network
em0: bound to 192.168.142.191 from 192.168.142.1 (60:e3:27:c8:4d:c7)
reordering libraries: done.
openssl: generating isakmpd/iked RSA keys... done.
ssh-keygen: generating new host keys: RSA DSA ECDSA ED25519
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
savecore: no core dump
checking quotas: done.
clearing /tmp
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd smtpd sndiod.
running rc.firsttime
Path to firmware: http://firmware.openbsd.org/firmware/6.4/
No devices found which need firmware files to be downloaded.
starting local daemons: cron.
Sat Dec 22 05:16:05 CET 2018
OpenBSD/sparc64 (caper.home.kuehrmann.net) (console)
login:
um die Warnungen beim OpenBSD-Boot (bei mir unknown option `v'
) zu beheben, ist eine kleine Anpassung der OpenBoot-Einstellungen nötig
folgender Befehl im ILOM öffnet beim nächsten Boot-Vorgang den OpenBoot-Prompt, statt das installierte Betriebssystem zu starten
set /HOST/bootmode script="setenv auto-boot? false"
jetzt einen Reboot durchführen, wieder die serielle Konsole öffnen, und auf den OpenBoot-Prompt warten
dort die Werte für boot-file
und boot-device
anpassen
{0} ok printenv boot-file
boot-file = -v
{0} ok printenv boot-device
boot-device = /pci@0/pci@0/pci@2/scsi@0/disk@0,0:a sdsboot sdsmirror
{0} ok set-default boot-file
{0} ok setenv boot-device /pci@0/pci@0/pci@2/scsi@0/disk@0
boot-device = /pci@0/pci@0/pci@2/scsi@0/disk@0
{0} ok boot
Boot device: /pci@0/pci@0/pci@2/scsi@0/disk@0 File and args:
OpenBSD IEEE 1275 Bootblock 1.4